Executive Series 2426 Printer Family User’s Guide
Windows NT Printer Drivers • 403
Memory: Enabling
PostScript Only
Certain options such as additional memory, the duplexer, or
additional trays may be installed in your printer.
Before using the printer, you must enter the printer driver(s) and
enable the options. You only need to do this once.
If you have additional memory in your printer, use these instructions
to update the Windows PostScript driver so that it recognizes the
additional memory:
1. Click Start → Settings → Printers.
2. Highlight the printer name. Click File then Properties.
3. Click the Device Settings tab.
4. Under Installable Options, click Memory Configuration.
5. Set the memory in the Change ‘Memory Configuration’ Setting
list to match what is now installed in the printer, as shown in the
Menu Map.
To print the Menu Map, see “Printer Settings (Menu Settings)” on
page 82.
6. Click OK. Close the Printers dialog box.
C73_NT_PS_Memoryk.tif