Filter
Top Products
110 Using the Copier
2 Press the Copy key.
3 Specify the desired copy settings.
" For details on specifying the copy mode and the copy density, refer to
“Specifying the Copy Quality Setting” on page 110.
For details on specifying the zoom ratio, refer to “Specifying the Zoom
Ratio” on page 111.
For details on selecting the media tray, refer to “Selecting the Media
Tray” on page 112.
For details on setting 2in1 copying, refer to “Setting 2in1 Copying” on
page 113.
For details on ID card copying, repeat copying or poster copying, refer
to “Setting a Copy Function” on page 114.
For details on duplex (double-sided) copying, refer to “Setting Duplex
(Double-Sided) Copying” on page 118.
For details on setting collated copying, refer to “Setting Collated (Sort)
Copying” on page 120.
4 Using the keypad, specify the desired number of copies.
" If the number of copies was incorrectly entered, press the Back key,
and then specify the correct number of copies.
5 To print color copies, press the Start-Color key. To print monochrome copies,
press the Start-Mono key.
Copying begins.
" If the Stop/Reset key is pressed while copying, JOB CANCEL
appears. To stop copying, select YES. To continue copying, select
NO.
Specifying the Copy Quality Setting
Select the document type and copy density appropriate for the contents and den-
sity of the document to be copied.
Selecting the Document Type
1 In the main screen (Copy mode), press the up or down arrow key to select
the current copy quality setting, and then press the Enter key.
2 Press the up or down arrow key to select MODE, and then press the Enter
key.
3 Press the up or down arrow key to select MIX, TEXT, PHOTO, FINE/MIX,
FINE/TEXT or FINE/PHOTO, and then press the Enter key.
The main screen (Copy mode) appears again.