Filter
Top Products
111 Using the Copier
Specifying the Copy Density
1 In the main screen (Copy mode), press the up or down arrow key to select
the current copy quality setting, and then press the Enter key.
2 Press the up or down arrow key to select DENSITY, and then press the Enter
key.
3 Press the up or down arrow key to select the desired copy density, and then
press the Enter key.
As the indicator is moved to right, the density becomes darker.
The main screen (Copy mode) appears again.
" If TEXT or FINE/TEXT is selected as the copy mode, select either
AUTO or MANUAL in step 3. If MANUAL is selected, specify the copy
density.
Specifying the Zoom Ratio
The zoom ratio can be specified either by selecting a preset zoom ratio or by
specifying a custom zoom ratio.
Selecting a Preset Zoom Ratio
1 In the main screen (Copy mode), press the up arrow or down arrow key to
select the current zoom ratio setting, and then press the Enter key.
2 Press the up arrow or down arrow key to select FIXED, and then press the ,
key.
3 Press the up arrow or down arrow key to select the desired zoom ratio, and
then press the Enter key.
The main screen (Copy mode) appears again.
" The following zoom ratios can be selected.
In metric dimensions:
50%, 70% (A4
→
A5), 81% (A4
→
B5), 100%, 115% (B5
→
A4), 141%
(A5
→
A4), 200%
In inch dimensions:
50%, 64% (LT
→
ST), 78% (LG
→
LT), 100%, 129% (ST
→
LT), 154%
(ST
→
LG), 200%
The zoom ratio cannot be changed using the keypad.
Specifying a Custom Zoom Ratio
1 In the main screen (Copy mode), press the up arrow or down arrow key to
select the current zoom ratio setting, and then press the Enter key.