Filter
Top Products
177 Maintenance
Do not leave the machine’s covers open for any length of time, especially in
well-lit places; light may damage the toner cartridges.
Do not open the machine during printing.
Do not tap media stacks on the machine.
Do not lubricate or disassemble the machine.
Do not tilt the machine.
Do not touch the electrical contacts, gears, or laser devices. Doing so may
damage the machine and cause the print quality to deteriorate.
Keep media in the output tray at a minimum level. If the media is stocked too
high, your machine may experience media misfeeds and excessive media
curl.
When lifting the machine, grasp the
areas shown in the figure.
Keep the machine level to avoid
toner spillage.
Before moving the machine, remove
the dust cover, and fold up Tray 1.
If the optional lower feeder unit,
attachment and duplex option are
installed, remove them and move
them separately.
If you get toner on your skin, wash it
off with cool water and a mild soap.
CAUTION!
If you get toner in your eyes, wash it out immediately with cool water and
consult a doctor.
Make sure any parts removed during cleaning are replaced before you plug in
the machine.
21kg
46 lbs