Filter
Top Products
239 Troubleshooting
COMMUNICATION ERROR
USB Memory
While data was
being sent in Scan
mode, the connec-
tion to the USB
memory device was
interrupted.
Check the connection
to the USB memory
device, and then try
sending the data
again.
COMMUNICATION ERROR
xxx Server
While data was
being sent in Scan
mode, the connec-
tion to the server
was interrupted.
Check the settings
specified in the NET-
WORK SETTING and
E-MAIL SETTING
menus, and then try
sending the data
again.
DISCONNECT
USB Memory
The connection to
the USB memory
device was inter-
rupted.
Check the connection
to the USB memory
device, and then try
sending the data
again.
DISCONNECT
xxx Server
The connection to
the server was inter-
rupted.
Check the settings
specified in the NET-
WORK SETTING and
E-MAIL SETTING
menus, and then try
sending the data
again.
DESTINATION SET
BY MANUAL UP TO 16
There were more
than 16 addresses
found with an LDAP
search.
Increase the number of
entered characters,
and then perform the
search again.
I/C END The time to replace
the imaging car-
tridge has been
reached.
Replace the imaging
cartridge.
I/C LIFE END
REPLACE I/C
The time to replace
the imaging car-
tridge has been
reached.
Replace the imaging
cartridge.
I/C LOW The imaging car-
tridge is nearly
empty.
Prepare the imaging
cartridge.
This message... means... Do this...