Filter
Top Products
144 Using the Scanner
" For details on entering/editing text, refer to “Entering Text” on
page 265.
7 Use the keypad to edit the e-mail address, and then press the Enter key.
The edited settings are saved, and the DIAL REGISTER menu appears
again.
" If the edited speed dial destination is registered in the favorite list or
with a group dial destination, a confirmation message asking whether
or not to keep the destination registered as it is appears after the oper-
ation in step 7 is performed. To keep the destination registered as it is,
select Yes. To cancel the registration, select No.
Registering Group Dial Destinations
An e-mail address can be registered with a group dial destination. A maximum of
20 group dial destinations can be registered. (A maximum of 50 e-mail
addresses can be registered with one group.)
" The addresses that can be registered as group dial destinations are lim-
ited to addresses registered as speed dial destinations or as other group
dial destinations.
1 In the main screen (Scan mode), press the up or down arrow key to select
UTILITY, and then press the Enter key.
2 Press the up or down arrow key to select DIAL REGISTER, and then press
the Enter key.
3 Press the up or down arrow key to select GROUP DIAL, and then press the
Enter key.
4 Use the keypad to type in the number (between 1 and 20) for the group dial
destination, and then press the Enter key.
5 Use the keypad to type in the group name, and then press the Enter key.
" For details on entering/editing text, refer to “Entering Text” on
page 265.
6 Use the keypad to type in the number (between 1 and 220) for the speed dial
destination to be added to the group, and then press the Enter key.
The information registered for the selected speed dial destination appears.
7 Press the Enter key again.
8 To register another speed dial destination, press the up or down arrow key to
select ADD, press the Enter key, and then repeat the procedure from step 6.
9 To finish registering speed dial destinations, press the up or down arrow key
to select FINISH, and then press the Enter key.