Filter
Top Products
236 Troubleshooting
If the problem is not resolved, even after all of the above have been performed,
contact your Oki dealer with the error information.
Colors are
not register-
ing properly;
colors are
mixed or
have
page-to-pag
e variation.
The scanner unit or
front cover is opened
during the calibration.
Set
MACHINE SETTING/CALI-
BRATION
in the UTILITY menu to
ON, and then perform the AIDC color
calibration. For details, refer to
“MACHINE SETTING Menu” on
page 41.
Gradations are not
adjusted correctly.
The imaging car-
tridges is not correctly
seated.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
One or more of the
toner cartridges may
be defective.
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
The color
has a poor
reproduction
or has poor
color density.
The imaging cartridge
may be defective.
Remove the imaging cartridge and
check for damage. If it is damaged,
replace it.
Symptom Cause Solution