Filter
Top Products
9-14
n Line Processing of Antenna Cable
9.2.4. Setting up the LCD Hinge
1. Wind the Cable coming out of the LCD Unit counterclock-
wise to the LCD Hinge.
2. Set the Lock Plate and the Hinge Top Cover, and rotate
the LCD Hinge to turn the Display Unit to front
3. Put the LCD Cable and the Antenna Cable in the Cable
Holder.
4. Fit another Cable Holder and clamp the Cable Holders in
the LCD Hinge.
5. Fix the LCD Hinge using the 2 Screws <N17> and the 2
Cable Holder Plates.
Screws <N17 > : DXYN3+J8FNL
A
C
B
D
Safety Working
Safety Working
Safety Working
EVDO/EDGE Antenna
LAN-AUX ANT
LAN Main
/BT ANT
EVDO-AUX
Cable Cushion
Cable Cushion
Cable Cushion
Cable Cushion
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Tape Pen Holder
Safety Working
Details of "B"
Avoid running over
the rib, etc..
Avoid running over the rib, etc..
Insert it between the wall and the rib after attaching.
Insert it between the pins.
Hook it.
Details of "D"
Details of "A"
Details of "D"
Cable Cushion Attachment Method
(3 Places)
Bundle and wind 3
antenna cables.
Match to the edge of Cabinet
Match to the edge of Cabinet
Match to the
edge of Cabinet
Match to the
edge of Cabinet
Match to the edge of Cabinet
Put the Cable on each hookPut the Cable on each hook
Put the Cable on each hook
Put the center of Cushion between the ribs.
Avoid running over
the rib, etc..
Avoid running over
the rib, etc..
Note: Avoid any stress on the solder.
<N17>
<N17>
LCD Cable
Holder
Sheet
Cable
Holder
Cable
Holder
Cable
Holder
Plate
Cable Holder
Plate
Cable
Holder
Plate
LCD
Hinge