Filter
Top Products
9-32
n Line Processing of Antenna Cable of Main Unit
Step 1
Step 2
Step 3
Step 4
Cable
Cable Process 1/3
Place brown/blue/gray cables at left and
white/black cables downward.
After connecting the white antenna cable,
connect it into the Holder as illustrated.
After connecting the black antenna cable,
connect it into the Holder as illustrated.
After connecting the gray antenna cable,
connect it into the Holder as illustrated.
Put the surplus under along the rib.
Step 10
Step 7
Attach Side
Tape
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Sheet
Audio PCB Ass’y
0 2mm
Step 5
2 5mm
Step 6
Step 8
0 1mm
0 1mm
Step 11
Step 9
Cable Process 2/3
Fix the Ausio PCB
Attach Side
After processing the cables, inserting the FPC and locking,
incline the Audio PCB into the arrow direction.
Insert the FPC,
Lock Check
Connect the blue antenna cable.
Connect the gray antenna cable.
Insert it into the right
notch of the Clamper.
Check the blue cable from the hole.
Connect the FPC
Remove the Release Paper
and attach it.
To prevent from the cable
damage by screw bead.
Remove the Release Paper
and attach it.
To prevent from the cable
damage by screw head.
0 1mm
0 1mm
Sheet