Filter
Top Products
9-4
9.1.7. Removing the DIMM Cover and Bot-
tom Cover
1. Remove the 5 Screws. <N1>
2. Remove the DIMM Cover.
3. Remove the 2 Screws. <N6>
4. Remove the DIMM Stopper Base.
5. Remove the DIMM Heat Plate.
6. Remove the DIMM memory card.
7. Remove the 6 Screws. <N8>
8. Remove the 13 Screws. <N6>
9. Remove the Bottom Cover.
Screws <N1>: DRHM0002ZA
Screws <N6>: DRQT26+E4FKL
Screws <N8>: DRSB3+8FKL
9.1.8. Removing the USB PCB and
Antenna PCB
1. Remove the Screw. <N6>
2. Disconnect the Cable from the Connector. (CN100)
3. Remove the Tape.
4. Remove the USB PCB.
5. Open the Connector Cover.
6. Remove the 2 Screws. <N3>
7. Remove the Black Cable and remove the Antenna PCB.
Screws <N3>: DRQT2+G6FKL
Screws <N6>: DRQT26+E4FKL
<N6>
<N6>
<N6>
<N6>
<N6>
<N6>
<N6>
<N6>
<N6>
Bottom Cover
DIMM Memory
Card
DIMM Stopper
Base
DIMM Heat
Plate
DIMM Cover
<N1>
<N1>
<N1>
<N1>
<N1>
<N6>
<N6>
<N6>
<N6>
<N6>
<N6>
<N8>
<N8>
<N8>
<N8>
<N8>
<N8>
<N3>
<N3>
<N6>
USB PCB
Connector
(CN100)
Antenna PCB
Connector Cover
Antenna Cable
(Black)
Tape