Filter
Top Products
9-6
5. Remove the 6 Screws. <N16>
6. Remove the Screw. <N18>
7. Disconnect the 2 Cables from the 2 Connectors.
(CN700,CN701)
8. Remove the Pet Tape and disconnect the Cable from the
Connector. (CN31)
9. Remove the Main chasis.
10. Remove the Tape.
11. Disconnect the 2 Cables from the 2 Connectors.
(CN400,CN401)
12. Remove the 2 Screws. <N6>
13. Remove the 2 Screws. <N21>
14. Remove the MP Guide.
15. Remove the MP PCB.
16. Remove the Coin Battery Cushion.
17. Disconnect the Cable from the Connector. (CN19)
18. Remove the Coin Battery.
19. Remove the Tape.
20. Disconnect the 2 Cables from the 2 Connectors.
(CN4,CN11)
21. Remove the 2 Modem Cable Sheets.
22. Remove the 2 Screws. <N32>
23. Remove the Modem LAN Case.
24. Remove the 1394 Sheet.
25. Remove the 2 Screws. <N11>
26. Remove the Tape.
27. Disconnect the Cable from the Connector (J2) and
remove the MDC.
28. Remove the Modem Cable.
29. Remove the 8 Screws. <N32>
30. Remove the 2 Screws. <N6>
31. Remove the Screw. <N11>
32. Remove the Main PCB.
Screws <N6>: DRQT26+E4FKL
Screws <N7>: DRSB26+10HKL
Screws <N11>: DFHE5025XA
Screws <N16>: DRQT26+E5FKL
Screws <N18>: DRSB26+8FKL
Screws <N21>: DXQT2+E12FNL
<N16>
<N16>
<N16>
<N18>
<N16>
<N16>
<N16>
Connector
(CN701)
Connector
(CN31)
Pet Tape
Connector
(CN700)
Main Chasis
to Connector(CN701)
to Connector(CN700)
<N6>
<N21>
<N21>
<N6>
Connector
(CN4)
Connector
(CN11)
Connector
(CN400)
Connector
(CN401)
Coin Battery
MP PCB
MP Guide
Connector
(CN19)
Coin Battery
Cushion
Tape
<N32>
<N6>
<N11>
<N11>
<N32>
<N32>
<N32>
<N32>
<N32>
<N32>
<N32>
<N32>
1394 Sheet
Modem
Cable
Connector
(J2)
MDC
Modem
LAN
Case
Modem
Cable Sheet
Tape
<N11>
<N6>
<N32>