Filter
Top Products
6. Fax
51
6.10 Junk fax prohibitor
(preventing fax reception from
undesired callers)
If you subscribe to Caller ID service (page 53), this
feature prevents fax reception from calls that do not
show caller information.
Additionally, the unit will not accept faxes originating
from numbers that match the ones on a programmable
junk fax prohibitor list.
L Make sure that the {Fax} light is ON.
Important:
L This feature does not work if you receive faxes
manually.
6.10.1 Activating the junk fax prohibitor
1
{Advance}
2 Press {V} or {^} repeatedly to select “Junk Fax
Prohibitor”. i {Set}
3 Press {V} or {^} repeatedly to select
“Prohibitor”.
4 Press {<} or {>} repeatedly to select “On”. i
{Set}
5 Press {Advance} to exit.
6.10.2 Storing undesired callers
You can register up to 20 undesired numbers from the
Caller ID list (page 53) if you do not wish to receive faxes
from them.
1 {Advance}
2 Press {V} or {^} repeatedly to select “Junk Fax
Prohibitor”. i {Set}
3 Press {V} or {^} repeatedly to select “Junk List
Set”. i {Set}
4 Press {V} or {^} repeatedly to display the party you
do not want to receive faxes from. i {Set}
L If you have programmed the wrong item, press
{Set} again to remove “,” and cancel the item.
5 {Back} i {Advance}
To display the junk fax prohibitor list
1. {Advance}
2. Press {V} or {^} repeatedly to select “Junk Fax
Prohibitor”. i {Set}
3. Press {V} or {^} repeatedly to select “Junk List
Display”. i {Set}
4. Press {V} or {^} to display the items on the list.
5. Press {Advance} to exit.
To print the junk fax prohibitor list
1. {Advance}
2. Press {V} or {^} repeatedly to select “Junk Fax
Prohibitor”. i {Set}
3. Press {V} or {^} repeatedly to select “Junk List
Print”. i {Set}
4. Press {Advance} to exit.
To erase an item from the junk fax prohibitor list
1. {Advance}
2. Press {V} or {^} repeatedly to select “Junk Fax
Prohibitor”. i {Set}
3. Press {V} or {^} repeatedly to select “Junk List
Display”. i {Set}
4. Press {V} or {^} repeatedly to select the desired
item. i {#}
L To cancel erasing, press {Stop}, then press
{Advance}.
5. {Set} i {Advance}