Filter
Top Products
9. Programmable Features
56
9 Programmable FeaturesFeatures Summary
9.1 Programming
1 {Menu}
2 Press {#} and the 3-digit code (page 57 to page
71).
3 Press the appropriate selection to display the
desired setting.
L This step will vary depending on the feature.
4 {Set}
5 Press {Menu} to exit.
To select features through the web browser interface
(LAN connection only)
You can change features through the web browser
interface instead of the unit.
1. Start Multi-Function Station. i [Utilities] i
[Configuration Web Page]
L You can also access the unit by entering its IP
address on the web browser.
2. Select the desired category from the menu bar.
[Device Configuration]: features of the unit
[Advance Configuration]: advanced features for
each mode
[Network Configuration]: network features
3. Type “root” as the user name, then enter the
password (feature #155 on page 57). i [OK]
4. Select the desired feature tab at the top of the right
frame.
5. Change the settings or edit information.
L This step will vary depending on the feature.
6. [Submit]
L The new data will be transferred to the unit.
7. Close the web browser.
Note:
L The settings displayed in the web browser will be
updated by clicking [Reload].
{Set}
{Menu}