Filter
Top Products
12. Paper Jams
99
3 Close the cover at the left side of the optional input
tray.
12.1.3 When the recording paper is not fed
into the unit properly
The display will show the following.
– “Check Pick Up Input Tray #1” (standard
input tray)
– “Check Pick Up Input Tray #2” (optional input
tray)
1 Pull the paper input tray until it clicks into place, then
pull it completely out, lifting the front part of the tray.
Remove the recording paper and straighten.
2 Re-load the recording paper.
Standard input tray:
Optional input tray:
3 Insert the paper input tray to the unit, lifting the front
part of the tray. Then push it completely into the unit.
Note:
L If the error message is still displayed, check the
recording paper specifications and re-install
recording paper. See page 16 and page 78 for
details.