Filter
Top Products
25
Setup
Initial Preparation
Using legal size paper
A
B
Button
Press and hold the button on the paper cassette to
release the tray (A), and slide the tray so that “LGL” on
the tray aligns with “"” on the cassette and lock into
place (B).
Tray
Checking the amount of remaining recording paper
You can see the amount of remaining paper without removing the paper cassette.
Types of paper to avoid
≥Extremely smooth or shiny paper or paper that is highly textured
≥Coated papers
≥Letterhead imprinted with low temperature or thermography. These materials may transfer onto the fusing
roller and cause damage. Any pre-printed paper should use inks compatible with 200 oC (392 oF) for
0.1 second.
≥Damaged or wrinkled paper, or paper with irregularities such as tabs, staples, etc.
≥Multipart forms or carbonless paper
≥Paper with a cotton and/or fiber content over 25 %
≥Ink jet paper (It may transfer onto the fuser roller and cause damage.)
E
F
Shows that paper
is empty.
Shows that paper
is fully loaded.