Panasonic KX-FLM600 All in One Printer User Manual


 
83
Setup (PC)
PC Software
Installing the PANA LINK software!
1
Start Windows 95 or Windows 98 and close all
applications.
2
Insert the included CD into your CD-ROM
drive.
The language dialog box will appear.
Select the desired language that you use
with this software. Then click [OK].
4
Follow the instructions on the screen until all
files have been installed.
5
Be sure to read a README file for more
information.
The README file contains the following
information:
1. Install/uninstall PANA LINK for Windows
95/98.
2. Install/uninstall KX-FLM600/650 for
Windows 3.1.
3. Print and Scan from Windows 3.1.
4. How to feed recording paper manually.
5. How to use Help.
6. Acrobat Reader
7. ECP Problems
3
The installation will automatically start.
If the language dialog box does not appear:
The installation will automatically start.
If the language dialog box does not appear
and the installation does not start
automatically:
Click Start, choose Run... . Type “d:\setup
(where d: is the drive letter of your CD-ROM
drive). Click OK.
(If you are not sure what the drive letter is for
your CD-ROM drive, please use Windows
Explorer and look for the CD-ROM drive.)
Note:
For detailed instructions on PANA LINK software, use the Help function.
The screens shown in these instructions are from Windows 95.
Windows 3.1 or 3.11 users:
If you are using Windows 3.1 or 3.11, follow these steps to install the software.
1. From the Program Manager, click File, choose Run... .
2. Type “d:\setup” (where d: is the drive letter of your CD-ROM drive).
3. Click OK.
The printer driver only is available. Please read a README file (README.WRI) in the CD-ROM for more
information.
The display illustrations may differ slightly from the display of the actual product.
The display details are subject to change without notice for improvement.