Filter
Top Products
30
Setup
Setting your logo
The logo can be your company, division or name.
/
MENU
START/SET/COPY
STOP
JOG DIAL
INSERT
HYPHEN
To correct a mistake
≥Press (fi) or (fl) to move the cursor to the
incorrect character, then make the correction.
To delete a character
≥Move the cursor to the character you want to
delete and press (STOP).
To insert a character
1. Press (fi) or (fl) to move the cursor to the right
of where you want to insert the character.
2. Press (INSERT) (One-Touch Dial key 2) to insert
a space and enter the character.
1
Press (MENU).
Display:
2
Press (#), then (0)(2).
3
Press (START/SET/COPY).
4
Enter your logo, up to 30 characters, by using the
dial keypad. See next page for details.
Example: Bill
1. Press (2) twice.
Cursor
2. Press (4) six times.
3. Press (5) six times.
4. Press (fl) to move the cursor to the next space
and press (5) six times.
5
Press (START/SET/COPY).
6
Press (MENU).
SETUP ITEM [ ]
LOGO=Bill
LOGO=Bil
LOGO=Bi
LOGO=B
LOGO=
YOUR LOGO
1.SYSTEM SET UP
Note:
≥You can enter your logo by rotating
(JOG\DIAL) (see next page).