Filter
Top Products
81
Choosing an enlargement/reduction rate
The unit can make enlarged or reduced copies of a document.
∫ To enlarge a document:
Select the desired enlargement rate by rotating (JOG\DIAL) to the right. The unit will only enlarge the center
part of the document and print it on two pages.
The unit can enlarge copies by 5 % to as much as 200 % of the original.
Sample of an enlarged copy:
Original document
Area to be enlarged
Enlarged copy
Original document
Enlarged copy
BC
FG
ABCD
EFGH
ABCD
EFGH
BC
FG
Area to be enlarged
∫ To reduce a document:
Select the desired reduction rate by rotating (JOG\DIAL) to the left.
The unit can reduce copies by 5 % to as little as 50 % of the original.
Note:
≥If the appropriate reduction rate is not programmed, the document may be divided and the top of the
second sheet will be deleted.
Copying
Fax/Copy
(Collated)
4
3
2
1
4
3
2
1
(Uncollated)
4
4
3
3
2
2
1
1
≥If you turn the collating feature on, the unit will
store the document into memory and print it. If
memory becomes full while storing, the unit
will only print out the stored pages.
≥After copying, the collating feature will turn off
automatically.
Printing collated copies
The unit will print uncollated copies. You can also print collated copies. See the example below.
Example: Making two copies of a 4 page original document
≥200 % example
≥150 % example