![](http://pdfasset.owneriq.net/4/23/423603a2-f685-4086-abc1-e271f98bb441/423603a2-f685-4086-abc1-e271f98bb441-bg2d.png)
45
Sending a fax using the JOG DIAL directory!
Before using this feature, program the desired names and telephone numbers into the directory (p. 39).
1
Open the document feeder tray.
2
Adjust the width of the document guides to the size
of the document.
3
Insert the document (up to 15 pages) FACE DOWN
until the unit grabs the document and a single beep
is heard.
Display:
4
If necessary, press (RESOLUTION) repeatedly to
select the desired setting (p. 43).
5
Rotate (JOG\DIAL) until the desired name is
displayed.
Example:
≥To confirm the number, press (NAME/TEL\NO.).
6
Press (START/SET/COPY).
≥The unit will start transmission.
Helpful hints:
≥You can confirm the stored items on the display (p. 41)
or on the telephone number list (p. 123).
≥The connecting tone will be heard during dialing to tell
you the status of the other party’s machine (p. 59).
Note:
≥While scanning, do not move the pages which have
already ejected. A paper jam may occur. Allow the
scanning process to finish before viewing documents.
≥If the desired name has not been stored, press (STOP)
and dial the number manually.
≥For further details about using the JOG DIAL, see
page 41.
CONNECTING.....
FAX=<Alice>
Alice
STANDARD
Document guides
Document
feeder tray
(RESOLUTION)
(START/SET/COPY)
(STOP)
(MONITOR)
FACE DOWN
(NAME/TEL\NO.)
(JOG\DIAL)
Sending Faxes
Fax/Copy
If your unit cannot send a fax
Verify that the number dialed is answered by
the other party’s machine.
1. Rotate (JOG\DIAL) until the desired name is
displayed.
2. Press (MONITOR).