Filter
Top Products
33
Advanced
Operations
1 2 3
4 5 6
7 8 9
0
Storing telephone numbers for automatic dialing
The unit’s memory allows you to use both one-touch dialing and speed dialing for rapid access to your most
frequently dialed numbers.
One-touch dialing: 18 stations (Each of the 9 direct station keys is divided into an upper station and a lower
station).
Speed dialing: This unit is equipped with 100 additional dialing stations. These stations are assigned to
2-digit numbers (00–99).
1
Press (MENU) until the following message is
displayed.
Display:
2a
One-touch dialing:
For upper stations (1–9)
Press one of the direct call station keys.
a: For lower stations (10–18)
Press (LOWER), then press one of the direct
call station keys.
2b
Speed dialing:
Press K, then press the desired 2-digit number
(00–99).
3
Enter the telephone number up to 30 digits in
length.
¡To enter a hyphen in a telephone number, press
(HYPHEN) (direct call station 8).
4
Press (START/COPY/SET).
5
Enter the station name, up to 10 characters, by
following the instructions on page 14.
6
Press (START/COPY/SET).
¡To program other stations, repeat steps 2a (or
2b) to 6.
7
Press (STOP).
NAME=
STORE TEL NO.
To keep the telephone number
confidential
Press (SECRET) (direct call station 3) after
entering the telephone number.
¡The telephone number will not appear on the
display or the telephone number list.
¡(SECRET) is not counted as a digit.
To erase a stored number and
station name
Press (STOP) in step 3 to erase the telephone
number. Press (DELETE) (direct call station 7)
repeatedly in step 5 until all of the characters are
erased.
Then press (START/COPY/SET).
Helpful hint:
¡To confirm stored telephone numbers and
station names, print a telephone number list
(see page 70).
(MENU)
(LOWER)
(STOP)
(START/COPY/SET)
Speed dial
stations
Direct call
stations
(DELETE)
(SECRET)
(HYPHEN)
Automatic dialing