Filter
Top Products
57
Special Settings
Setting the silent fax recognition ring count
When a fax call is received in the TEL/FAX mode, the unit will automatically activate the fax function without
ringing. If the unit detects a voice call, it will ring. If a voice call is not answered within the selected number of
rings (3 to 6 rings), the unit will switch back to the fax mode. This is for machines that do not send a calling
tone.
1
Press (MENU).
Display:
2
Press K, then C @.
3
Press (START/COPY/SET).
4
Press or to select the desired number.
5
Press (START/COPY/SET).
6
Press (MENU).
RING=3 [ML]
SILENT FAX RING
SYSTEM SET UP
Note:
¡If you increase the number of rings, you may
not be able to receive documents from some
older types of facsimile machines.
1 2 3
4 5 6
7 8 9
0
(START/COPY/SET)
(MENU)
Dial keypad
1 2 3
4 5 6
7 8 9
0
Changing the caller’s recording time
You can choose from two lengths of recording times for an incoming message.
VOX (unlimited): The unit records an incoming message as long as the caller talks (pre-selected setting).
1 MIN (1 minute): The unit will record each incoming message up to 1 minute.
1
Press (MENU).
Display:
2
Press K, then A @.
3
Press (START/COPY/SET).
4
Press or to select the desired setting.
5
Press (START/COPY/SET).
6
Press (MENU).
MODE=VOX [ÿŸ]
RECORDING TIME
SYSTEM SET UP
(MENU)
Dial keypad
(START/COPY/SET)