Filter
Top Products
[PICTURE] menu
54 -
ENGLISH
Settings
Loading saved proles
●
Select a saved prole (color adjustment result). The
adjustment values set in the prole are applied to the
[PICTURE MODE] menu and recorded.
Press the ▲▼ buttons to select [PROFILE].1)
Use the 2)
▲
▼
buttons to switch the prole.
[NORMAL] [USER1]
[USER3] [USER2]
[NORMAL]
Default setting.
[USER]
[1] to [3]
Displayed when prole is saved.
[
■
x.v.Color]
You can switch on/off the automatic adjustment system for
signals which comply with HDMI standard (x.v.Ycc).
Switch settings Switch settings
[ON] Active
[OFF] Inactive
Note
This function is only available when a signal supporting
z
HDMI standards (x.v.Ycc) is input via an HDMI input
terminal and [PICTURE MODE] is set to [REC709].
■
[DETAIL CLARITY]
You can adjust the detail clarity system levels.
Reduce the
effect
Strengthen the
effect
Setting range: 0 to +7
z
■
[CINEMA REALITY]
You can switch the automatic image synchronizer on/off for
24 frames a second images, such as movies.
Switch settings Switch settings
[ON] Cinema reality active
[OFF] Cinema reality inactive
Note
[CINEMA REALITY] is effective only with interlace
z
signals.
■
[TV-SYSTEM]
[Only during VIDEO or S-VIDEO signal input]
The projector automatically detects the input signal but if
an unstable signal is input, set the system manually. Set
with a system format that matches the input signal.
Switch settings Switch settings
The settings change as follows each time the button
is pressed.
[AUTO] [NTSC]
[SECAM] [NTSC4.43]
[PAL-N] [PAL]
[PAL-M]
Attention
Set this to [AUTO] under normal conditions.
z
Switch the settings to the respective TV signal formats.
z
Note
Setting [AUTO] will automatically select NTSC,
z
NTSC4.43, PAL, PAL-M, PAL-N, SECAM, or PAL60.