Filter
Top Products
[OPTION] menu
ENGLISH
- 77
Settings
[LAMP POWER]
Switch the lamp intensity according to the usage
environment of the projector and its intended use.
Switch settings Switch settings
[NORMAL]
When higher luminance is
required
[ECO]
When lower luminance is
sufcient
Note
The brightness in the [ECO] settings is lowered
z
enabling saving power and reducing operating noise. It
is recommended that you use the [ECO] setting when
viewing in a place where natural light is blocked and
there is no articial light.
When no input signal is detected, the function is disabled.
z
[FUNCTION BUTTON]
Display the function currently assigned to the
<FUNCTION> button of the remote control. Also,
cancel the assigned function.
How to cancel function assignment
■
Press the <ENTER> button.1)
The [FUNCTION BUTTON] conrmation message
z
is displayed.
FUNCTION BUTTON
FUNCTION BUTTON IS DISABLED.
CANCELOK
Select [OK] with the ◄ ► buttons.2)
Press the <ENTER> button.3)
Note
See “Using the <FUNCTION> button” in “Remote
z
control operation” regarding allocating operations to the
<FUNCTION> button. (
page 34)
[VIERA LINK SETTINGS]
Congure VIERA Link.
Press the <ENTER> button.
The [VIERA LINK SETTINGS] conrmation
z
message is displayed.
VIERA LINK SETTINGS
VIERA LINK
POWER ON LINK
POWER OFF LINK
ENERGY SAVING MODE
UNUSED DEVICE ENERGY SAVE
VERSION : HDAVI Control 5
ON
NO
NO
QUICK START
NO (STAY ON)
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
[
■
VIERA LINK]
Set whether the VIERA Link control is active.
Switch settings Switch settings
[ON] Active
[OFF] Inactive
When [VIERA LINK] is [ON], the following settings can be
made.
[POWER ON LINK]
[POWER OFF LINK]
[ENERGY SAVING MODE]
[UNUSED DEVICE ENERGY SAVE]