Filter
Top Products
[LENS CONTROL] menu
ENGLISH
- 71
Settings
[LENS MEMORY NAME CHANGE]
■
Press the ▲▼ buttons to select the 1)
memory name to be changed.
LENS MEMORY NAME CHANGE
LENS MEMORY1
LENS MEMORY2
LENS MEMORY3
LENS MEMORY4
LENS MEMORY5
LENS MEMORY6
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
Press the <ENTER> button.2)
[LENS MEMORY NAME INPUT] screen is
z
displayed.
LENS MEMORY NAME INPUT
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcde fghijklm
nopqrstuvwxyz
1234567890
!"#$%&'
＊ +-/=?@\^
_`|
~
()<>[]{},.:;
ALL DELETE
SPACE
OK CANCEL
Press the ▲▼◄► buttons to specify 3)
the location of the required character
to enter and press the <ENTER>
button.
You can enter up to 16 characters.
z
Select [ALL DELETE] and press the <ENTER>
z
button to erase all input text. If you press the
<DEFAULT> button on the remote control, you
can erase the character currently selected by
the cursor in the input box.
Press the ▲▼◄► buttons to select 4)
[OK].
Press the <ENTER> button.5)
Note
Press the <ENTER> button without entering any text
z
to keep the default name ([LENS MEMORY 1] - [LENS
MEMORY 6]).
[AUTO SWITCHING]
This function automatically identies wide signal
*1
or
16:9/4:3 and automatically recalls memory settings
that have been set for each screen size.
*1 : Wide signals are 2.35:1, 2.40:1, 2.50:1, 2.55:1 aspect
signals.
AUTO SWITCHING
2.35:1 IMAGE DETECTION
16:9 IMAGE DETECTION
OFF
OFF
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
Press the ▲▼ buttons and select the 1)
item for automatic identication.
Press the ◄► buttons to select your 2)
required lens memory for automatic
identication.
The [LENS MEMORY] setting which has been
z
selected for [2.35:1 IMAGE DETECTION] is loaded
after a given period of time once the input signal
switches from 16:9/4:3 to 2.35:1.
The [LENS MEMORY] setting which has been
z
selected for [16:9 IMAGE DETECTION] is loaded
after a given period of time once the input signal
switches from 2.35:1 to 16:9/4:3.
If [OFF] is selected, automatic identication will not
z
be performed.
This function is not available when [ZOOM] or
z
[V-FIT] is selected from the [ASPECT] menu.
Note
If the lens memory is not registered using [LENS
z
MEMORY SAVE], you cannot select [AUTO
SWITCHING].
When displaying the menu or test pattern, automatic
z
identication is not performed.
Image size may not be correctly recognized if there
z
is noise in the picture or external device generates
noise. Image size may also not be correctly recognized
depending on the video.
Image size may not be correctly recognized if the input
z
signal level from the external device is not set to the
suggested value range. In this case, adjust the input
signal level using the [WAVEFORM MONITOR] menu.
(
page 41)
Image size may not be correctly recognized if the
z
screen position is not correctly adjusted. In this case,
adjust the screen position using the [POSITION] menu.
(
page 57)