Filter
Top Products
Care and replacement
ENGLISH
- 87
Maintenance
Remove the air lter cover.11)
Using a Phillips screwdriver to turn the xing screw
z
of the air lter cover until loose and remove the
cover.
Air filter cover
Air filter cover fixing
screw
Remove the air lter unit.12)
Hold the grips on the air lter unit, and remove it
z
from the projector.
Air filter unit
Grips (
UP
arrow engraved)
* After removing the air lter unit, remove any large
build ups of dirt or dust in the air lter unit bay and
the air intake port on the projector.
Press the protrusions of air lter unit 13)
removed from the projector in the
direction of the black arrow and remove
the air lter frame.
Replace the air lter/electrostatic lter.14)
Replace the air lter and electrostatic lter in the air
z
lter unit with new ones.
* Ensure you attach the electrostatic lter and air
lter in the correct order.
Air filter case
Air filter (black)
Electrostatic filter
(white)
Protrusions
Ribs
Air filter frame
Catches
Assemble the air lter unit.15)
First insert the electrostatic lter (white) into the
z
center of the case ensuring that its edges do not
ride on top of the ribs, and then insert the air lter
(black) so that its four corners are within the case
before attaching the air lter frame.
* Take care so that the air lter does not get caught
between the air lter frame and the case.
* Align the catches and protrusions on the air lter
case and air lter frame when assembling the
air lter unit. When attaching the air lter frame,
ensure that the 4 catches are properly aligned with
the protrusions on the air lter case and they have
clicked into place.
Attach the air lter unit to the projector.16)
Attach the air lter unit to the projector using the
z
reverse of the procedure in 12).
* Insert the air lter unit into the projector in the
direction of the arrow engraved into the air lter
frame (
UP
)
until it clicks into place.
Attach the air lter cover, and rmly 17)
tighten the air lter cover xing screw
(one) with a Philips screwdriver.
Insert the power plug into a power outlet, 18)
and press the <ON> side of the <MAIN
POWER> switch to turn on the power.
Press the power <19)
/|> button on the
projector or on the remote control to
start video projection.