Filter
Top Products
[PICTURE] menu
56 -
ENGLISH
Settings
Press the ▲▼◄► buttons to select [OK].5)
Press the <ENTER> button.6)
Note
Press the <ENTER> button without entering any text to
z
keep the default name ([MEMORY1-16]).
■
[MEMORY LOAD]
You can access the details saved through [MEMORY
SAVE].
MEMORY LOAD
MEMORY1
MEMORY2
MEMORY3
MEMORY4
MEMORY5
MEMORY6
MEMORY7
MEMORY8
MEMORY9
MEMORY10
MEMORY11
MEMORY12
MEMORY13
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
1/2
Press the ▲▼ buttons to select the 1)
memory name to be called.
Press the <ENTER> button.2)
The video adjustments for the recalled memory
z
name are switched to.
Note
If there is no saved setting in the [MEMORY SAVE] or
z
[ALL DELETE] has been performed, the [MEMORY
LOAD] menu will not be selectable.
For details how to access with the remote control, see
z
“Loading a saved setting” in “Remote control operation”.
(
page 33)
■
[MEMORY DELETE]
You can delete memory entries.
MEMORY DELETE
MEMORY1
MEMORY2
MEMORY3
MEMORY4
MEMORY5
MEMORY6
MEMORY7
MEMORY8
MEMORY9
MEMORY10
MEMORY11
MEMORY12
MEMORY13
1/2
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
Press the ▲▼ buttons and select the 1)
memory name to be deleted.
Press the <ENTER> button.2)
Select [ALL DELETE] to delete all memory entries.
z
[MEMORY DELETE] conrmation message is
z
displayed.
MEMORY DELETE
DELETE THE MEMORY 1 DATA.
CANCELOK
Select [OK] with the ◄ ► buttons.3)
Press the <ENTER> button.4)
■
[MEMORY NAME CHANGE]
You can edit the memory name settings.
MEMORY NAME CHANGE
MEMORY1
MEMORY2
MEMORY3
MEMORY4
MEMORY5
MEMORY6
MEMORY7
MEMORY8
MEMORY9
MEMORY10
MEMORY11
MEMORY12
MEMORY13
1/2
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
Press the ▲▼ buttons and select the 1)
memory name to be changed.
Press the <ENTER> button.2)
The [MEMORY NAME INPUT] screen is displayed.
z
MEMORY NAME INPUT
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcde fghijklm
nopqrstuvwxyz
1234567890
!"#$%&'
＊ +-/=?@\^
_`|
~
()<>[]{},.:;
ALL DELETE
SPACE
OK CANCEL
Press the ▲▼◄► buttons to specify 3)
the location of the required character to
enter and press the <ENTER> button.
You can enter up to 16 characters.
z
Select [ALL DELETE] and press the <ENTER>
z
button to erase all input text. If you press the
<DEFAULT> button on the remote control, you can
erase the character currently selected by the cursor
in the input box.
Press the ▲▼◄► buttons to select [OK].4)
Press the <ENTER> button.5)
Note
Press the <ENTER> button without entering any text to
z
keep the default name ([MEMORY1-16]).
SIGNAL MODE
(Available with signals from COMPUTER IN/
COMPONENT IN/HDMI IN only.)
The name of the signal being projected is displayed.
Note
See “List of compatible signals” for signal details.
z
(
page 95)