Filter
Top Products
Setting up
34 - ENGLISH
Getting Started
Setting up
Projection method
You can project images vertically and diagonally. You can select rear (
page 68) or ceiling (
page 68) from the
menu. Select the projection method appropriate to the environment.
■■
Mounting on the ceiling and
projecting forward
■■
Setting on a desk/oor and
projecting from rear
(Using the translucent screen)
Menu item Setting
[Ceiling] [On]
[Rear] [Off]
Menu item Setting
[Ceiling] [Off]
[Rear] [On]
■■
Mounting on the ceiling and
projecting from rear
(Using the translucent screen)
■■
Setting on a desk/oor and
projecting forward
Menu item Setting
[Ceiling] [On]
[Rear] [On]
Menu item Setting
[Ceiling] [Off]
[Rear] [Off]
Attention
■
z
To get a high picture quality, set up the screen in a location that is, as far as possible, not directly affected by
natural light or electric light. Draw the curtains or blinds and turn off the lights.
■
z
When setting up the projector with tilt, do not use the projector at an inclination angle that exceeds ±10°
vertically to the horizontal plane. Installing the projector at an inclination angle that exceeds this value may
reduce the component life and result in malfunctions.
10° 10°
10° 10°
10°
10°