Filter
Top Products
[Setting] menu
ENGLISH - 71
Settings
[Lamp interval]
Sets the replacement cycle when [Lamp select] is set
to [1-Lamp]. After the replacement cycle, the lamp for
use is automatically changed.
■
z
The set time here is a guideline time.
1) Press
▲▼
to select [Lamp interval].
2) Press the <ENTER> button.
3) Press
▲▼
to switch the setting.
[Off] Does not change lamps.
[12 H]/[24 H]/
[200 H]/
[500 H]/
[1000 H]/
[2000 H]
Changes lamps in the set intervals.
■
z
When the set time is reached,
the projector lights a lamp, giving
priority to the lamp with the
shortest total usage time.
[Edge blending]
Makes it less easy to see the join between screens
when multiple screens are used.
1) Press
▲▼
to select [Edge blending].
2) Press the <ENTER> button.
■
z
Displays [Edge blending] setting screen.
3) Press
▲▼
to select [Edge blending].
4) Press the <ENTER> button.
5) Press
▲▼
to select [On].
■
z
When not performing [Edge blending], select
[Off]. Items other than [Back] will be grayed out
and cannot be selected.
6) Press the <ENTER> button.
■
z
The panel edge is displayed in green, changing
to red when the setting value for the edge
blending width is 1 or larger.
Note
■
z
Even when the [Edge blending] setting screen is
displayed, if you press the <ZOOM> button, the
<FOCUS> button, the <LENS SHIFT> button,
or the <SHUTTER> button, the setting screen is
cleared and the selected function is given priority.
On completion of the function, the projector returns
to the setting screen.
■
z
The join between screens may stand out with
certain types of image. Reducing the value of
[Contrast] in the [Image adjust] menu may make
the join look more natural.
■■
To adjust the blending start
position and blending width
1) Press
▲▼
to select the location
([Start]/[Width] of [Left]/[Right]/[Top]/
[Bottom]) to be corrected.
[Start]
Sets the blending start position.
■
z
The frame (green) moves as you
change the numerical value.
[Width]
Adjusts the blending width.
■
z
The red line moves as you
change the numerical value.
2) Press the <ENTER> button.
3) Press
▲▼
to change the value, and
press
◀▶
to move between digits.
■
z
The numerical values can also be entered using
the number (<0> - <9>) buttons of the remote
control.
■
z
Press the <ENTER> button to end the edit
mode.
Note
■
z
[Left] and [Right] adjustable value: 0 - 512
■
z
[Top] and [Bottom] adjustable value: 0 - 384