Filter
Top Products
[Setting] menu
ENGLISH - 75
Settings
■■
To set the display of test pattern
1) Press
▲▼
to select [Auto test pattern].
2) Press the <ENTER> button.
3) Press
▲▼
to switch the setting.
■
z
Press the <ENTER> button to end the edit
mode.
[Off] Clears display of test pattern.
[On] Displays the test pattern.
■■
To temporarily clear the setting
screen
1) Press
▲▼
to select [Menu off].
2) Press the <ENTER> button.
■
z
Press any button to return to the setting screen.
■■
To perform [Factory default]
setting
When the currently selected [Measured] and
[Target] are reset, the values are returned to the
factory default settings.
1) Press
▲▼
to select [Factory default].
2) Press the <ENTER> button.
■
z
A screen for conrming whether to restore the
default setting is displayed.
3) Select [Yes], and press the <ENTER>
button.
■
z
The conrmation screen is displayed.
4) Select [Yes], and press the <ENTER>
button.
■■
To reset a value during
adjustment
The setting returns to its value before adjustment.
The values of [Measured] and [Target] return to
the standard value stored in [Store].
1) Press
▲▼
to select [Reset].
2) Press the <ENTER> button.
3) Select [Yes], and press the <ENTER>
button.
■■
To register adjusted content you
have changed
Registers values after adjustment.
1) Press
▲▼
to select [Store].
2) Press the <ENTER> button.
3) Select [Yes], and press the <ENTER>
button.
■■
To display the test pattern
1) Press
▲▼
to select [Test pattern].
2) Press the <ENTER> button.
■
z
Displays the test pattern selection screen.
3) Press
▲▼
to select the test pattern to
be displayed, and press the <ENTER>
button.
■
z
The selection screen is cleared and the test
pattern is displayed.
■
z
Press any button to return to the setting screen.
■
z
Press
▲▼
to select [Exit], and press the
<ENTER> button to return to the setting screen
of [Advanced color matching].
[Measured] [Red]/[Green]/[Blue]
[Target]
[Red]/[Green]/[Blue]/[Cyan]/
[Magenta]/[Yellow]/[White]
■■
To return to the sub menu
Returns the projector to the sub menu.
1) Press
▲▼
to select [Back].
2) Press the <ENTER> button.