Filter
Top Products
About indicator status
88 - ENGLISH
Maintenance
■■
When operating correctly
The status of the indicator is displayed with the following symbols.
s
: Off,
●
: On,
H
: Flashing,
■
: On or Flashing
Indicator
Status of the projector
<POWER>
Green
<STANDBY>
Red
<WARNING
TEMP.>
Red
<WARNING
FILTER>
Orange
<SHUTTER>
Blue
<LAMP 1
REPLACE>/
<LAMP 2
REPLACE>
Orange
s s s s s s
The power plug has been removed from the outlet.
s ● s
*1
■
*1
■
*1
■
*1
The projector is in the standby mode.
Turns on when pressing the power <POWER ON>
button on the remote control or the power
button on the control panel.
● s s
*1
■
*1
s ■
*1
The projector is operating normally.
s H
*2
s
*1
■
*1
■
*1
■
*1
The lamp is cooling down.
The projector does not turn on when pressing the
power <POWER ON> button on the remote control or
the power button on the control panel until the
standby indicator <STANDBY> changes to on.
H
*2
● s
*1
■
*1
s ■
*1
The projector is in the power management mode.
The lamp will turn on when controlling the projector,
allowing the user to start operating it.
H
*2
H
*2
s
*1
■
*1
s ■
*1
Power management mode is ON and the lamp is
cooling down.
● s s
*1
■
*1
● ■
*1
The shutter function has been turned on.
Press any button on the remote control or the control
panel to cancel the function.
s ● s ■
*1
H
*2
■
*1
The projector is in the shutter management mode.
The lamp will turn on when controlling the projector,
allowing the user to start operating it.
s H
*2
s ■
*1
H
*2
■
*1
Shutter management mode is on and the lamp is
cooling down.
*1: The indicator will turn on or ash under certain conditions, regardless of the status of other indicators.
*2: The indicator will ash in approximately 1-second intervals.