Filter
Top Products
[Image adjust] menu
ENGLISH - 63
Settings
[Advanced color]
Sets the operation of the color control device that
independently controls the quantity of yellow light.
1) Press
▲▼
to select [Advanced color].
2) Press the <ENTER> button.
3) Press
◀▶
to switch the setting.
■
z
The setting will change as follows each time
you press the button.
[Off] [Auto]
■
z
The white balance may change depending on
the image.
[Sharpness]
1) Press
▲▼
to select [Sharpness].
2) Press the <ENTER> button.
■
z
The adjustment screen is displayed.
3) While looking at the screen, press
◀▶
to adjust the setting.
Operation Adjustment Range
Press
▶
.
The sharpness
increases.
0 - +31
Press
◀
.
The sharpness
decreases.
[Gamma]
1) Press
▲▼
to select [Gamma].
2) Press the <ENTER> button.
■
z
The adjustment screen is displayed.
3) While looking at the screen, press
◀▶
to adjust the setting.
Operation Adjustment Range
Press
▶
.
Brightens the
intermediate
gradations.
0 - +15
Press
◀
.
Darkens the
intermediate
gradations.
[Noise reduction]
Reduces noise when viewing old video or other
images affected by noise.
1) Press
▲▼
to select [Noise reduction].
2) Press the <ENTER> button.
3) Press
◀▶
to switch the setting.
■
z
The setting will change as follows each time
you press the button.
[Off] [On]
[Progressive]
Can be set for video input signals of 480i, 576i, 1035i,
and 1080i.
1) Press
▲▼
to select [Progressive].
2) Press the <ENTER> button.
3) Press
◀▶
to switch the setting.
■
z
The setting will change as follows each time
you press the button.
[Off] [On] [Film]
■
z
Set to [Off] when video with a lot of movement
is affected by ickers or horizontal lines.
■
z
[Film] enables playback of 3-2 pull down/2-2
pull down images on the projector without loss
of picture quality in the images.
■
z
When switching, the image will distort for a
moment.