Filter
Top Products
About indicator status
90 - ENGLISH
Maintenance
■■
When there is a problem with internal power
The status of the indicator is displayed with the following symbols.
s
: Off,
●
: On,
H
: Flashing,
■
: On or Flashing
Indicator
Status of the projector
<POWER>
Green
<STANDBY>
Red
<WARNING
TEMP.>
Red
<WARNING
FILTER>
Orange
<SHUTTER>
Blue
<LAMP 1
REPLACE>/
<LAMP 2
REPLACE>
Orange
H
*1
● H
*1
H
*1
H
*1
H
*1
A problem has been detected within the projector.
The projector will not turn back on even when pressing
the power <POWER ON> button on the remote control
or the power button on the control panel.
Remove the power plug from the outlet, and plug it
back in again.
If the power turns off, or the indicator turns on or
ashes again, remove the power plug from the outlet
and contact your dealer to request an inspection and
repair. Do not leave the projector plugged in with the
indicator on or ashing. Doing so may cause a re or
electric shock.
*1: The indicator will ash in approximately 0.5-second intervals.
■■
When there is a problem with the air lter
The status of the indicator is displayed with the following symbols.
s
: Off,
●
: On,
H
: Flashing,
■
: On or Flashing
Indicator
Status of the projector
<POWER>
Green
<STANDBY>
Red
<WARNING
TEMP.>
Red
<WARNING
FILTER>
Orange
<SHUTTER>
Blue
<LAMP 1
REPLACE>/
<LAMP 2
REPLACE>
Orange
■
*1
■
*1
■
*1
● ■
*1
■
*1
The indicator noties you when the time set with [Filter
counter timer] (
page 83) has been reached. Replace
the air lter. ( will be shown at the top right of the
screen simultaneously.)
Alternatively, the indicator noties you when [Filter
counter remaining] becomes 0%. Replace the air
lter. ( will be shown at the top right of the screen
simultaneously.
*2
)
*1: The indicator will turn on or ash under certain conditions, regardless of the status of other indicators.
*2: When [Display] (
page 69) is set to [On], the freeze function (
page 47) or shutter function (
page 47) will not be displayed on
the screen during operation.