Filter
Top Products
Wireless LAN (M-DIRECT)
1
2
3
4
5
6
[IP ADDRESS]1
Enter the IP address.
[SUBNET MASK]2
Enter the subnet mask.
[SSID]3
Set the SSID to be used in M-DIRECT.
[CHANNEL]4
Set the channel to be used in M-DIRECT.
[KEY]5
Set the key to be used in M-DIRECT.
Input either 8 to 63 alphanumerics or a 64 digit string in the
hexadecimal format.
[Back]/[Next]6
Click the [Back] button to return to the original screen.
The current settings are displayed by pressing the [Next]
button.
Click the [Submit] button to update the settings.
Wireless LAN (USER 1~USER 3)
1
2
3
4
5
6
7
8
9
10
7
7
[DHCP ON]/[DHCP OFF]1
To enable the DHCP client function, set to [DHCP ON].
[IP ADDRESS]2
Enter the IP address when not using a DHCP server.
[SUBNET MASK]3
Enter the subnet mask when not using a DHCP server.
[DEFAULT GATEWAY]4
Enter the default gateway address when not using a
DHCP server.
[DNS1]/[DNS2]5
Enter the preferred DNS/alternate DNS server when not
using a DHCP server.
[SSID]6
Enter the same character string that are registered in
the access point.
[Back]/[Next]7
Click the [Back] button to return to the original screen.
The current settings are displayed by pressing the [Next]
button.
Click the [Submit] button to update the settings.
[AUTHENTICATION]8
Set the user authentication method used by the network to
be connected.
[EAP]9
Select the EAP setup in the RADIUS server.
[ENCRYPTION]10
Select the encryption method to be used for
communication between the projector and the network.
Note
The screen items will change according to the authentication method of wireless LAN which is connected. f
100 -
ENGLISH
Chapter 4 Settings - [SECURITY] menu