Filter
Top Products
Powering on/off
Connecting the power cord
Make sure that the supplied power cord is securely xed to the projector body to prevent it from being removed easily.
For details of power cord handling, refer to “Read this rst!” (
Æ
page 7).
Attaching
Check the shapes of the <AC IN> terminal on the back of the projector body and the power cord 1)
connector and insert the plug completely in the correct direction (until you hear the side tabs click in
place).
Removing
Confirm that the projector is in standby mode, and remove the power plug from the outlet.1)
Remove the power cord connector from the <AC IN> terminal of the projector body while pressing the 2)
side tabs.
40 -
ENGLISH
Chapter 3 Basic Operations - Powering on/off