Filter
Top Products
8
7
9
8
7
[E-MAIL ADDRESS 1]/[E-MAIL ADDRESS 2]7
Enter the E-mail address to be sent. Leave [E-MAIL
ADDRESS 2] blank when two E-mail addresses are not
to be used.
Settings of the conditions to send E-mail8
Select the conditions to send E-mail.
[MAIL CONTENTS]:
Select either [NORMAL] or [SIMPLE].
[ERROR]:
Send an E-mail when an error occurred in the self-
diagnosis.
[LAMP RUNTIME]:
An E-mail message is sent when the remaining lamp on
time for the lamp has reached the value set at the right
eld.
[INTAKE AIR TEMPERATURE]:
Send an E-mail when the air intake temperature has
reached the value set at the above eld.
[Submit]9
Update the settings.
[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1
2
3
4
5
6
7
8
[Auth]1
Select the authentication method specied by your
Internet service provider.
[SMTP Auth]2
Set when the SMTP authentication is selected.
[POP server name]3
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0 - 9)
Minus sign (-) and period (.)
[User name]4
Enter the user name for the POP server or the SMTP
server.
[Password]5
Enter the password for the POP server or the SMTP
server.
[SMTP server port]6
Enter the port number of the SMTP server.
(Normally 25)
[POP server port]7
Enter the port number of the POP server.
(Normally 110)
[Submit]8
Update the settings.
102 -
ENGLISH
Chapter 4 Settings - [SECURITY] menu