Filter
Top Products
About your projector
Remote control
1
2
3
5
6
7
8
9
4
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
27
28
Remote control signal emitters1
<2 b> button
Turn the projector on.
<AUTO SETUP/CANCEL> button3
Automatically adjusts the image display position while
projecting the image. In addition, it acts as <CANCEL>
button when using the MEMORY VIEWER function.
(
Æ
page 47)
<MENU> button4
Open or close the On-Screen Menu. (
Æ
page 54)
<ENTER> button/5 asq(VOL -) w(VOL+) buttons
Navigate the menu display.
Adjust the volume.
<DEFAULT> button6
Resets the content of the sub-menu to the factory
default. (
Æ
page 55)
<COMPUTER 2> button7
Switches the COMPUTER2 signal to project.
<COMPUTER 1> button8
Switches the COMPUTER1 signal to project.
<Miracast> button9
Switches the Miracast signal to project. (
Æ
page 49)
<MEMORY VIEWER> button10
Switches the MEMORY VIEWER signal to project.
(
Æ
page 49)
<ID ALL> button11
Used to simultaneously control all the projectors with one
remote control for a system using multiple projectors.
(
Æ
page 29)
<ID SET> button12
Sets the ID number of the remote control to use for a
system using multiple projectors. (
Æ
page 29)
<D.ZOOM +/-> buttons13
Zoom in and out the images. (
Æ
page 50)
<PAGE UP/PAGE DOWN> buttons14
You can page up or page down les such as PowerPoint
through "Wireless Manager ME6.0". (
Æ
page 49)
<MUTE> button15
Used to mute the audio. (
Æ
page 52)
<P IN P> button (Only for PT-VW345NZ)16
Operate the P IN P function. (
Æ
page 51)
<ON/OFF> switch17
When using the remote control, set this switch to “ON”. Set
it to “OFF” to avoid misoperation when it is not in use.
<18 v> button
Turn the projector off.
Remote control indicator19
Flashes if any button in the remote control is pressed.
<KEYSTONE> button20
Correct keystone distortion. (
Æ
page 47)
<RETURN> button21
Return to the previous menu or cancel the setting.
<FUNCTION> button22
Assigns a frequently used operation as a shortcut button.
<HDMI> button23
Switches the HDMI signal to project.
<Panasonic APP> button24
Switches the Panasonic APPLICATION signal to project.
<VIDEO/S-VIDEO> button25
Switches the VIDEO signal or S-VIDEO signal to project.
<FREEZE> button26
Pauses the projected image and mute the audio
temporarily. (
Æ
page 50)
Number buttons27
Act as number buttons. Use these buttons when setting
the remote control codes or entering the password.
<P-TIMER> button28
Operate the P-TIMER function. (
Æ
page 52)
<AV MUTE> button29
Used to turn off the audio and video temporarily.
(
Æ
page 51)
26
This jack is not used for these
projector models.
29
ENGLISH
-
25
Chapter 1 Preparation - About your projector