Filter
Top Products
[AUTO SETUP SETTING]
Set the automatic execution of AUTO SETUP.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP> button on the
remote control on each occasion if you input unregistered signals frequently at meetings, etc.
Press 1) as to select [AUTO SETUP SETTING].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[AUTO]
Enables the auto setup function when switching signals.
[BUTTON]
Enables the auto setup function only when the <AUTO SETUP> button is pressed.
[SIGNAL SEARCH]
When the power is turned on, this function automatically detects the terminal which signals are input and sets the function to
switch.
Press 1) as to select [SIGNAL SEARCH].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[ON]
Enables input detection automatically.
[OFF]
Disables input detection automatically.
Note
If the [SIGNAL SEARCH] is set to [ON] when there is no signal input, press the <AUTO SETUP> button on the remote f
control, this function automatically detects the terminal to which signals are input and then switches.
[BACK COLOR]
Set the display of the projected screen when there is no signal input.
Press 1) as to select [BACK COLOR].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[BLUE]
Displays the entire projection area in blue.
[BLACK]
Displays the entire projection area in black.
[DEFAULT LOGO]
Displays the Panasonic logo.
[USER LOGO]
Displays the image registered by the user.
Note
To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM. f
If you do not register the image of the [USER LOGO], the projected image will be displayed in black even if the [BACK f
COLOR] is set to [USER LOGO].
[WIDE MODE]
Using this function when displays the incorrect signals input.
Press 1) as to select [WIDE MODE].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[AUTO]
Displays by judging the signal automatically. Set to this mode normally.
[OFF]
When input the 4:3 signal.
[ON]
When input the wide signal.
[SXGA MODE]
This function is used if the whole projected image is not displayed when SXGA signal is input. Set it to [SXGA] normally.
Press 1) as to select [SXGA MODE].
Press 2) qw to switch the item.
ENGLISH
-
71
Chapter 4 Settings - [DISPLAY OPTION] menu