Filter
Top Products
Controlling the volume of the speaker
You can control the volume of the projector’s speaker or audio output.
buttons
Press the <VOL -> or <VOL +> button on the remote control.1)
Press f qw on the control panel.
<VOL ->
Decreases the volume.
<VOL +>
Increases the volume.
Using the FUNCTION button
Some operations in the menu can be assigned to the <FUNCTION> button on the remote control so that it can be used as an
easy shortcut button.
button
Press the 1) <FUNCTION> button on the remote control.
To assign functions to the <FUNCTION> button
Press the <MENU> button on the control panel or the remote control to display the menu items (main 1)
menu, sub menu, or details menu) you want to assign.
Refer to “Navigating through the menu” ( f Æ page 54) for the operation of the on-screen menu.
Press and hold the <FUNCTION> button for 3 seconds or more.2)
Note
After settings have been completed, the assigned menu item (main menu, sub-menu, or details menu) will be displayed in f
[ASSIGNED FUNCTION] of the operation guide under the menu.
Perform the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] ( f Æ page 78) when deallocating functions.
Switching the input signal
You can switch the input signals to project.
buttons
Press <COMPUTER 1>, <COMPUTER 2>, <HDMI> or <VIDEO/S-VIDEO> button on the remote control.1)
Press the <INPUT SELECT> button on the control panel. f
<COMPUTER 1>
Switch to COMPUTER1 input.
<COMPUTER 2>
Switch to COMPUTER2 input.
<HDMI >
Switch to HDMI input.
<VIDEO/S-VIDEO>
Switch to VIDEO or S-VIDEO input.
48 -
ENGLISH
Chapter 3 Basic Operations - Basic operations by using the remote control