Filter
Top Products
[DAYLIGHT VIEW]
You can correct the image to the optimal vividness even if it is projected under a bright light.
Press 1) as to select [DAYLIGHT VIEW].
Press 2) qw or the <ENTER> button.
The [DAYLIGHT VIEW] individual adjustment screen is displayed. f
Press 3) qw to switch the item.
The items will switch each time you press the button. f
[AUTO]
Enables auto correction of [DAYLIGHT VIEW]. The luminance sensor detects the brightness and
color of the surroundings and automatically corrects the video display.
[ON]
Enables [DAYLIGHT VIEW].
[OFF]
Disables [DAYLIGHT VIEW].
Note
[DAYLIGHT VIEW] cannot be set to [AUTO] when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set to f
[REAR/DESK] or [REAR/CEILING].
The [AUTO] mode may not function properly if an object is placed on the top of the projector. f
[DIGITAL CINEMA REALITY]
(Only for movie-based signal input)
You can improve the vertical resolution of 2-2 and 2-3 pull down video.
This function is available only with the following signal inputs.
525i (480i), 625i (576i), 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24sF, S-VIDEO signal, VIDEO signal.
Press 1) as to select [DIGITAL CINEMA REALITY].
Press 2) qw or the <ENTER> button.
The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed. f
Press 3) qw to switch the item.
The items will switch each time you press the button. f
[ON]
Enables [DIGITAL CINEMA REALITY].
[OFF]
Disables [DIGITAL CINEMA REALITY].
[NOISE REDUCTION]
(Only when the <S-VIDEO IN >/<VIDEO IN> terminal is selected)
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
Press 1) as to select [NOISE REDUCTION].
Press 2) qw or the <ENTER> button.
The [NOISE REDUCTION] individual adjustment screen is displayed. f
Press 3) qw to switch the item.
The items will switch each time you press the button. f
[ON]
Enables [NOISE REDUCTION].
[OFF]
Disables [NOISE REDUCTION].
Attention
When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, f
set it to [OFF].
ENGLISH
-
61
Chapter 4 Settings - [PICTURE] menu