Filter
Top Products
[TV-SYSTEM]
(Only when the <S-VIDEO IN >/<VIDEO IN> terminal is selected)
The projector will automatically detect the input signal, but you can set the color system manually when an unstable signal is
input. Set the color system matching the input signal.
Press 1) as to select [TV-SYSTEM].
Press 2) qw or the <ENTER> button.
The [TV-SYSTEM] individual adjustment screen is displayed. f
Press 3) qw to select the color system.
The items will switch each time you press the button. f
Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM]. f
Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], f
[SECAM], or [PAL60].)
[RGB/YPBPR]/[RGB/YCBCR]
Set it to [AUTO] normally. If images are not displayed correctly when this is set to [AUTO], set either [RGB], [YCBCR] or [YPBPR]
in accordance with the input signal.
Press 1) as to select [RGB/YPBPR] or [RGB/YCBCR].
Press 2) qw or the <ENTER> button.
The [RGB/YP f BPR] or [RGB/YCBCR] individual adjustment screen is displayed.
Press 3) qw to switch the item.
The items will switch each time you press the button. f
[AUTO]
The sync signal automatically selects the signal [RGB]/ [YPBPR]/[YCBCR].
[RGB]
Select it for RGB signal input.
[YPBPR]
Select it for YPBPR signal input.
[YCBCR]
Select it for YCBCR signal input.
When the <COMPUTER 1 IN> terminal is selected
For 525i (480i), 625i (576i), 525p (480p) and 625p (576p) input f
Select [AUTO], [RGB] or [YCBCR].
For other movie-based signal input f
Select [AUTO], [RGB] or [YPBPR].
When the <HDMI IN > terminal is selected
For 525p (480p) and 625p (576p) input f
Select [AUTO], [RGB] or [YCBCR].
For other movie-based signal input f
Select [AUTO], [RGB] or [YPBPR].
Note
Refer to “List of compatible signals” ( f Æ pages 130 -131) for the signal details.
The signal selection may not function properly depending on connected devices. f
62 -
ENGLISH
Chapter 4 Settings - [PICTURE] menu