Filter
Top Products
– 107 –
Chapter 11 Maintenance and Inspection — Maintenance
Maintenance
Charging the built-in battery
The camera uses the built-in battery to remember the date and time.
If the camera is not turned on for more than a half year, the built-in battery runs out and when the <POWER> switch is turned <ON>, [BACK UP BATT
EMPTY] may be displayed on the viewnder screen for approx. 5 seconds.
In that case, charging of the built-in battery is complete by connecting an external DC power supply or a battery and leaving the camera turned off for
approximately four hours. Set the date and time after charging is complete.
If [BACK UP BATT EMPTY] is still displayed in the viewnder screen after charging when the <POWER> switch is turned <ON>, the built-in battery
needs to be replaced. Consult your dealer.