Filter
Top Products
– 75 –
Chapter 9 Other Useful Functions — Assigning functions to the USER buttons
Assigning functions to the USER buttons
Selected functions can be assigned to the USER buttons <1> to <4> and the control panel operation buttons.
Set each function to be assigned to [USER1] to [USER10] in [MENU] → [SYSTEM SETTINGS] → [USER SWITCHS].
There are no functions assigned to the USER button in the factory settings.
USER2
USER5
USER6
USER8 USER10
USER1
USER3
USER4
USER7
USER9
Selectable functions
Item Description
[INHIBIT] Disables assignment of functions.
[SIX BUTTONS] Sets against the USER <1> to <4> buttons, when the control panel operation button is used as the USER button.
[AWB] Assigns the automatic white balance function.
[ABB] Assigns the automatic black balance function.
[Y GET]
Assigns the function for displaying the luminance level of the image at the position indicated by the square marker displayed near the
center.
[EXPAND] Assigns the enlargement function.
[ASSIST] Turns the advanced assist function on/off.
[WFM] Enables/disables the viewnder wave form display.
[BARS] Assigns the color bars display function.
[FRAME LINE] Displays/hides the frame line display function.
[VF COLOR] Switches the viewnder display to either monochrome or color display.
[MON1 COLOR] Switches output images from the <MON OUT1> terminal.
[MON2 COLOR] Switches output images from the <MON OUT2> terminal.
[SMOOTH MODE] Assigns the smooth mode function.
[TEXT MEMO] Assigns the text memo function.
[SHOT MARK] Assigns the shot mark function.
[MAIN SLOT SEL] Assigns the function for switching the card for recording when two or more cards are inserted in the main slot.
[SUB SLOT SEL] Assigns the function for switching the card for recording when two or more cards are inserted in the sub slot.
[REC SW] Assigns the function of the <REC> button.
@@
NOTE
t Only the following functions can be assigned to [USER5] to [USER10].
[INHIBIT], [EXPAND], [ASSIST], [FRAME LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR],[SMOOTH MODE]