Filter
Top Products
– 89 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[GENLOCK] [GENLOCK MODE] Switches the synchronization signal of the camera signal.
[INT]: Synchronizes to the internal standard signal.
[EXT]: Synchronizes to the entered external standard signal.
f Factory setting: [INT]
[H PHASE COARSE] Roughly adjusts to match horizontal synchronization phase when building a system.
[−100]…[100]
f Factory setting: [0]
[H PHASE FINE] Minutely adjusts to match horizontal synchronization phase when building a system.
[−100]…[100]
f Factory setting: [0]
[INFORMATION] [OPERATION TIME] Displays the operation time of the camera.
[VERSION] Displays the information of the camera.
[VERSION]: Displays the version.
[MODEL NAME]: Displays the product name.
[SERIAL NO.]: Displays the serial number.
[UPDATE] Performs an update of the camera rmware. (Enabled only when there is a dedicated update le on the SD
memory card.)
[ONLINE SUPPORT] Switches the camera to the PASS (P2 Asset Support System) function mode.
[TRACE LOG] Reads the camera’s execution log from an SD memory card.
[SENSOR TEMP] Displays the ambient temperature detected by the camera module’s sensor.
[FAN] Sets the fan operation status.
[AUTO]: Controls the number of rotations according to the operation mode of the unit.
[ON]: Always rotates at high speed.
f Factory setting: [ON]
[CARDS/MEDIA] [CPS PASSWORD] Sets the CPS encryption password for the expressP2 memory card and the microP2 memory card.
[LOAD]: Loads CPS password from an SD memory card.
[SET]: Enters the CPS password.
[DELETE]: Deletes the password saved to the device, and disables encrypted formats.
[FORMAT CARD] Formats the card in the specied slot after the format menu is selected.
[MAIN SLOT1], [MAIN SLOT2], [SUB SLOT3], [SUB SLOT4], [SD CARD]
When a CPS password is set, you can select [NORMAL] (normal unencrypted format) or
[CPS(ENCRYPT)] (encrypted format).
Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
[MEDIA END ALARM] Sets whether to generate an alarm sound when there is no remaining free space in the expressP2 memory
card or the microP2 memory card.
[ON], [OFF]
f Factory setting: [ON]
[USER SWITCHS] [USER1] Sets the function to be assigned to the USER <1> button.
[INHIBIT], [SIX BUTTONS], [AWB], [ABB], [Y GET], [EXPAND], [ASSIST], [WFM], [BARS], [FRAME
LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], [SMOOTH MODE], [TEXT MEMO], [SHOT
MARK], [MAIN SLOT SEL], [SUB SLOT SEL], [REC SW]
f Factory setting: [INHIBIT]
[USER2] Sets the function to be assigned to the USER <2> button.
[INHIBIT], [SIX BUTTONS], [AWB], [ABB], [Y GET], [EXPAND], [ASSIST], [WFM], [BARS], [FRAME
LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], [SMOOTH MODE], [TEXT MEMO], [SHOT
MARK], [MAIN SLOT SEL], [SUB SLOT SEL], [REC SW]
f Factory setting: [INHIBIT]
[USER3] Sets the function to be assigned to the USER <3> button.
[INHIBIT], [SIX BUTTONS], [AWB], [ABB], [Y GET], [EXPAND], [ASSIST], [WFM], [BARS], [FRAME
LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], [SMOOTH MODE], [TEXT MEMO], [SHOT
MARK], [MAIN SLOT SEL], [SUB SLOT SEL], [REC SW]
f Factory setting: [INHIBIT]
[USER4] Sets the function to be assigned to the USER <4> button.
[INHIBIT], [SIX BUTTONS], [AWB], [ABB], [Y GET], [EXPAND], [ASSIST], [WFM], [BARS], [FRAME
LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR], [SMOOTH MODE], [TEXT MEMO], [SHOT
MARK], [MAIN SLOT SEL], [SUB SLOT SEL], [REC SW]
f Factory setting: [INHIBIT]
[USER5] Sets the function to be assigned to the control panel operation button. The control panel operation button
functions as a USER button.
Assign [SIX BUTTONS] to USER buttons <1> to <4>.
[INHIBIT], [EXPAND], [ASSIST], [FRAME LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR],
[SMOOTH MODE]
f Factory setting: [INHIBIT]
[USER6] Sets the function to be assigned to the control panel operation button. The control panel operation button
functions as a USER button.
Assign [SIX BUTTONS] to USER buttons <1> to <4>.
[INHIBIT], [EXPAND], [ASSIST], [FRAME LINE], [VF COLOR], [MON1 COLOR], [MON2 COLOR],
[SMOOTH MODE]
f Factory setting: [INHIBIT]