Filter
Top Products
– 66 –
Chapter 8 Output and Screen Display — SDI output
SDI output
Output format is set in [MENU] → [SYSTEM SETTINGS] → [SDI OUT].
One type of image is output from the four BNC terminals: <SDI OUT1> to <SDI OUT4>.
If the setting does not require all four terminals, there may be terminals that do not provide output. If the output format is 3G × 2, images are output from
the <SDI OUT1> and <SDI OUT2> terminals, and are not output from the <SDI OUT3> and <SDI OUT4> terminals.
Status, markers, etc. cannot be displayed.
During playback with the sub recorder, output is muted and the screen becomes black.
Output format list
— indicates that the item is not affected by the settings.
**P becomes the setting value of [SYSTEM MODE] → [FREQUENCY].
[SYSTEM MODE] [VFR SW] [SDI OUT] Output Format
[FREQUENCY]
[PIXEL] [MAIN CODEC] [P to PsF] [4K OUT TYPE] Signal Format
[23.98p]
[29.97p]
[4096×2160]
[AVC-Intra4K 422] [OFF] — [SQUARE]
4096×2160
**P
4:2:2
1.5G×4
— [2 SAMPLE INT]
4096×2160
**P
4:2:2
3G×2
[ON] — [SQUARE]
4096×2160
59.94P
4:2:2
3G×4
— [2 SAMPLE INT]
4096×2160
59.94P
4:2:2
3G×4
[59.94p]
[4096×2160]
[AVC-Intra4K 422] — — [SQUARE]
4096×2160
59.94P
4:2:2
3G×4
— [2 SAMPLE INT]
4096×2160
59.94P
4:2:2
3G×4
[25.00p]
[4096×2160]
[AVC-Intra4K 422] [OFF] — [SQUARE]
4096×2160
25.00P
4:2:2
1.5G×4
— [2 SAMPLE INT]
4096×2160
25.00P
4:2:2
3G×2
[ON] — [SQUARE]
4096×2160
50.00P
4:2:2
3G×4
— [2 SAMPLE INT]
4096×2160
50.00P
4:2:2
3G×4
[50.00p]
[4096×2160]
[AVC-Intra4K 422] — — [SQUARE]
4096×2160
50.00P
4:2:2
3G×4
— [2 SAMPLE INT]
4096×2160
50.00P
4:2:2
3G×4
[23.98p]
[29.97p]
[3840×2160]
[AVC-Intra4K 422] [OFF] — [SQUARE]
3840×2160
**P
4:2:2
1.5G×4
— [2 SAMPLE INT]
3840×2160
**P
4:2:2
3G×2
[ON] — [SQUARE]
3840×2160
59.94P
4:2:2
3G×4
— [2 SAMPLE INT]
3840×2160
59.94P
4:2:2
3G×4
[59.94p]
[3840×2160]
[AVC-Intra4K 422] — — [SQUARE]
3840×2160
59.94P
4:2:2
3G×4
— [2 SAMPLE INT]
3840×2160
59.94P
4:2:2
3G×4