Filter
Top Products
– 85 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[MON 2] Sets the output image from the <MON OUT2> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [ON]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [V-709]
[V-709]
When [MAIN] is set to [3D LUT]
[3D LUT]
f Factory setting: [V-Log]
[VF] Sets the output image from the <VF> terminal and the <VF SDI> terminal.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [ON]
[V-Log]/[GRADING]/[V-709]/[LCC]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]/[LCC]
When [MAIN] is set to [V-709]
[V-709]
When [MAIN] is set to [3D LUT]
[3D LUT]
f Factory setting: [V-Log]
[AUDIO INPUT] [AES/EBU IN] If this is set to [ON], the digital audio (AES/EBU standard-compliant) input from the <AUDIO IN 1> terminal
and <AUDIO IN 2> terminal is recorded in 4 channels.
In this case, analog input selection and volume adjustment is not possible.
[ON], [OFF]
f Factory setting: [OFF]
[FRONT MIC POWER] Enables/disables the front microphone phantom power.
[ON], [OFF]
f Factory setting: [ON]
[FRONT MIC LEVEL] Sets the front microphone input level.
[−40dB], [−50dB]
f Factory setting: [−40dB]
[REAR1 MIC POWER] Enables/disables the phantom power of the rear microphone connected to the <AUDIO IN 1> terminal.
[ON], [OFF]
f Factory setting: [OFF]
[REAR2 MIC POWER] Enables/disables the phantom power of the rear microphone connected to the <AUDIO IN 2> terminal.
[ON], [OFF]
f Factory setting: [OFF]
[REAR MIC LEVEL] Sets the input level of the rear microphone connected to the <AUDIO IN 1> and <AUDIO IN 2> terminals.
[−40dB], [−50dB], [−60dB]
f Factory setting: [−60dB]
[REAR LINE LEVEL] Sets the line input level from the <AUDIO IN 1> terminal and <AUDIO IN 2> terminal.
[4dB], [0dB], [−3dB]
f Factory setting: [4dB]
[FRONT1 MIC
LOWCUT]
Enables/disables the low-cut lter of front microphone 1.
[ON], [OFF]
f Factory setting: [OFF]
[FRONT2 MIC
LOWCUT]
Enables/disables the low-cut lter of front microphone 2.
[ON], [OFF]
f Factory setting: [OFF]
[REAR1 MIC LOWCUT] Enables/disables the low-cut lter of rear microphone 1.
[ON], [OFF]
f Factory setting: [OFF]
[REAR2 MIC LOWCUT] Enables/disables the low-cut lter of rear microphone 2.
[ON], [OFF]
f Factory setting: [OFF]
[CH IN SEL] Sets the input of audio channels 1 to 4.
[1t2FRONT 3t4REAR], [1t2REAR 3t4FRONT]
f Factory setting: [1t2FRONT 3t4REAR]
[TEST TONE] Sets whether to output a test signal when the video is made to a color bar.
[ON]: Outputs a test tone.
[OFF]: Does not output a test tone.
f Factory setting: [ON]
[AUDIO LEVEL] [FRONT1 LEVEL] Sets the level adjustment method of the front microphone 1 to manual or automatic.
[AUTO]: Adjust automatically.
[MANUAL]: Enables manual adjustment.
f Factory setting: [AUTO]
[FRONT2 LEVEL] Sets the level adjustment method of the front microphone 2 to manual or automatic.
[AUTO]: Adjust automatically.
[MANUAL]: Enables manual adjustment.
f Factory setting: [AUTO]
[REAR1 LEVEL] Sets the level adjustment method of the rear microphone 1 to manual or automatic.
[AUTO]: Adjust automatically.
[MANUAL]: Enables manual adjustment.
f Factory setting: [AUTO]