Filter
Top Products
– 88 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[EXTENDER] Displays/hides the extender.
[ON], [OFF]
f Factory setting: [ON]
[Y GET] Displays/hides brightness of Y GET.
[ON], [OFF]
f Factory setting: [ON]
[TC] Displays/hides the time code, user bits, and duration counter displays.
[TCG/TCR], [TCG], [OFF]
f Factory setting: [TCG/TCR]
[P2 CARD REMAIN] Displays/hides the display of the remaining recording free space of a P2 card.
[ON], [OFF]
f Factory setting: [ON]
[BATTERY REMAIN] Displays/hides the estimated remaining battery charge level.
[ON], [OFF]
f Factory setting: [ON]
[PROXY] Displays/hides proxy information.
[ON], [OFF]
f Factory setting: [ON]
[GPS] Displays/hides GPS signal reception status.
[ON], [OFF]
f Factory setting: [ON]
[MON OUT MARKER] [MON OUT1 SW] Displays/hides markers for the output from the <MON OUT1>.
[ON], [OFF]
f Factory setting: [OFF]
[MON OUT2 SW] Displays/hides markers for the output from the <MON OUT2>.
[ON], [OFF]
f Factory setting: [ON]
[LCD SW] Displays/hides markers for the control panel.
[ON], [OFF]
f Factory setting: [ON]
[CENTER MARKER] Controls the center mark.
[1]: + (large)
[2]: Open center (large)
[3]: + (small)
[4]: Open center (small)
[OFF]: Does not display.
f Factory setting: [1]
[SAFETY MARKER] Selects the type of frame for the safety zone marker.
[1]: Box
[2]: Corners
[OFF]: Does not display.
Factory setting: [OFF]
[SAFETY AREA] Sets the size of the safety zone marker.
[80%] - [100%] (1% step, xed aspect ratio)
f Factory setting: [90%]
[FRAME MARK] Enables/disables frame marker.
[ON], [OFF]
f Factory setting: [OFF]
[FRAME SIG] Sets frame marker aspect ratio.
[1.33:1], [1.44:1], [1.56:1], [1.78:1], [1.85:1], [2.35:1]
f Factory setting: [2.35:1]
[FRAME LEVEL] Sets the level of the outside of the frame marker.
[0%] - [100%] (10% step)
f Factory setting: [100%]
[MARKER & CHAR LVL] Sets the marker and character luminance.
[50%]…[100%] (10% step)
f Factory setting: [70%]
[USER BOX] Displays/hides the user box.
[ON], [OFF]
f Factory setting: [OFF]
[USER BOX WIDTH] Sets the width of the user box.
[1]…[100]
f Factory setting: [13]
[USER BOX HEIGHT] Sets the height of the user box.
[1]…[100]
f Factory setting: [13]
[USER BOX H POS] Sets the horizontal position of the center of the user box.
[−50]…[50]
f Factory setting: [0]
[USER BOX V POS] Sets the vertical position of the center of the user box.
[−50]…[50]
f Factory setting: [0]