Filter
Top Products
– 110 –
Chapter 11 Maintenance and Inspection — Warning system
Display Description Behavior and cause
[NO SD CARD!] No SD memory card. Insert an SD memory card.
[NOT SELECTED!] Attempted to delete without selecting clips. Select clips to delete.
[SAME CLIP IS SELECTED!]
Multiple instances of the same clip (copies) are included
in the clips selected.
Multiple instances of the same clip (copies) cannot be
copied simultaneously. Remove instances of the same
clip from selected items.
[TOO MANY CLIPS!] Too many clips are selected. Reduce the number of selected clips.
[UNKNOWN CONTENTS FORMAT!]
This is a warning of the contents for the version that is
not supported by the camera.
Match the device and content versions.
[UNKNOWN DATA!]
The metadata character code is invalid.
The metadata character code is UTF-8. Enter valid
characters using a viewer.
There is a problem with data in the le. Create the le again.
[USER CLIP NAME MODIFIED!]
When adding a counter value to the clip name,
characters must be deleted.
For the counter addition setting, the user clip name plus
the counter value can only contain up to 100 bytes.
Characters in the clip name are automatically deleted
when the total number of characters exceeds this limit.
[WRITE PROTECTED!] The P2 card or SD memory card is write-protected. Insert write-accessible media.
During soft keyboard operation
Display Description Behavior and cause
[AUTHENTICATION ERROR!] Manual authentication failed. Enter the correct password.
[CANNOT CHANGE!]
An attempt is made to enter the [PERSON] item (user
who enters the memo) when there is no text memo.
Enter the [TEXT] (text information) rst.
[CANNOT SET!]
[INVALID VALUE!]
The entered value is invalid. Change the input value.
[CANNOT SET!]
[NO INPUT!]
There is not input to the software keyboard. Enter the password.
[CANNOT SET!]
[RETRY PASSWORD IS DIFFERENT!]
The re-entered password is different. Enter the correct reference password.