Filter
Top Products
COMSPHERE 392xPlus Modems
3-78 November 1996 3920-A2-GN31-30
For Trellis Multipoint (TMp) modems (control or tributary), you must specify the remote access
password of the modem that will be accessed by the Remote function.
The following display does
not appear in point-to-point modems.
F1
Choose Password:
Ent "y
yyyyyyy
F2
F3
The
password field (yyyyyyyy) displays the remote access password of the modem to be accessed
by the Remote function.
To increment digits within the password field (yyyyyyyy), use the
and
keys to position the
cursor ( _ ) under the digit to be incremented. Press the F2 (
"
) key to increment the digit.
Press Enter (Ent) to select the modem that will be accessed by the Remote function.
F1
Select Channel >
Secondary
F2
F3
or
F1
Select Channel <
Prim (data blckd)
F2
F3
If
operation over the secondary channel is desired, press any function key to select the secondary
channel.
Secondary channel only appears if using V.34, V.32 terbo, V
.32bis, V
.32 or TMp
modulation. If operation over the primary channel is desired, press the key until primary
displays and press any function key
. Primary channel operation is not available when initiating
a Remote function from a TMp tributary modem.