Filter
Top Products
Default Configuration Options
F-93920-A2-GN31-30 November 1996
Table F-1
(8 of 10)
Factory Default Configuration Options
Configuration
Option
Sync
Dial
Default
Settings
UNIX Dial
Default
Settings
Async Dial
Default
Settings
TMp
Default
Settings
Async Leased
Default
Settings
Sync Leased
Default
Settings
V.42 / MNP / Buffer l
††
Error
Control Mode
Direct Direct Direct V.42/MNP/Buffer V.42/MNP/Buffer Direct
V.42bis
Compression
F
Enable Enable Enable Enable Enable Enable
MNP5
Compression
F
Enable Enable Enable Enable Enable Enable
EC Negotiate
Buf
fer
F
Disable Disable Disable Disable Disable Disable
EC Fallback
Character
F
013 013 013 013 013 013
Flow Control of
DTE F
CTS to DTE CTS to DTE CTS to DTE CTS to DTE CTS to DTE CTS to DTE
Flow Control of
Modem
F
R
TS to Modem
R
TS to Modem
R
TS to Modem
R
TS to Modem
R
TS to Modem
R
TS to Modem
XON/XOFF
Passthrough
F
Disable Disable Disable Disable Disable Disable
Modem to Modem
Flow Control
F
Disable Disable Disable Disable Disable Disable
Break Buf
fer
Control
F
Keep Data Keep Data Keep Data Keep Data Keep Data Keep Data
Send Break
Control
F
Data First Data First Data First Data First Data First Data First
Buffer Disconnect
Delay F
10 sec 10 sec 10 sec 10 sec 10 sec 10 sec
Maximum Frame
Size F
256 256 256 256 256 256
Cellular
Enhancement
F
Disable Disable Disable Disable Disable Disable
Reduced Async
Buf
fer Size
F
Disable Disable Disable Disable Disable Disable
††
Not applicable when Async/Sync mode is set to Sync.
F
Refer to Chapter 4,
DCP Configuration
, for additional information.
l
Not applicable when MUX Mode is enabled.