Filter
Top Products
DCP Configuration
4-633920-A2-GN31-30 November 1996
Table 4-12
(6 of 6)
V.42/MNP/Buffer Configuration Options — Singleport Mode A
CellularEnhance: Disable
Nxt Disable Enable
This configuration option only appears when Async/Sync Mode is configured for Async, and Error Control
Mode is configured for V42/MNPorBfr, V42/MNPorDsc, LAPM_or_Disc, or LAPM_or_Bufr.
Cellular Enhancement. When enabled, the modem uses non-standard techniques to enhance V.42 operation for cellular
applications. It is still compatible, however, with modems which do not have the cellular enhancement implemented or
enabled.
The AT command is S-Register S91=
n
, where
n
is 0 for Disable and 1 for Enable.
RdcdAsyncBufSiz: Disable
End Disable Enable
This configuration option only appears when Async/Sync Mode is configured for Async, and Error Control
Mode is configured for BufferMode.
Reduced Asynchronous Buffer Size. When enabled, the modem’s buffer size is limited to a maximum of 20 characters.
The AT command is S-Register S97=
n
, where
n
is 0 for Disable and 1 for Enable.